89441A
1.INSTALL DECELERATION SENSOR
Install the deceleration sensor with the 2 bolts.
Do not use any parts which have been dropped or struck.
After installation, check that nothing is caught between the deceleration sensor and body, causing it to tilt.
Do not do anything to deform the bracket of the sensor, such as kicking or stepping on it.
Connect the deceleration sensor connector.
Securely connect the deceleration sensor connector.
Attach the fuel lid control cable clamp to the deceleration sensor.
46334
2.INSTALL INTERMEDIATE LEVER PROTECTOR
58810J
3.INSTALL CONSOLE BOX ASSEMBLY
w/ Console Box Lid:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(w/ Console Box Lid)>INSTALLATION
w/o Console Box Lid:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(w/o Console Box Lid)>INSTALLATION
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
89441A
5. DECELERATION SENSOR CHECK