Home › Drivetrain › VF2CM TRANSFER / 4WD / AWD › TRANSFER OIL
RM3250E _52 Drivetrain _038037 VF2CM TRANSFER / 4WD / AWD _0186289 TRANSFER OIL A

VF2CM TRANSFER / 4WD / AWD  TRANSFER OIL  REPLACEMENT  


PROCEDURE

Hide 1.DRAIN TRANSFER OIL

NOTICE:
C315967

Before proceeding with work, wedge a cloth or similar item into the transfer case lower protector to prevent transfer oil from sticking to the transfer case protector cushion.


a.
C325881C01
2.333,1.75 2.167,1.75 2.167,1.75 2,1.417 true 1.229,1.885 0.813,1.052 0.813,1.052 0.646,1.052 true 2.458,1.646 2.771,1.844 0.313,0.198 10 false *1 0.427,0.979 0.74,1.177 0.313,0.198 10 false *2
*1 Filler Plug
*2 Drain Plug


Remove the filler plug and gasket.


b.

Remove the drain plug and gasket to drain the transfer oil.


c.

Install a new gasket to the drain plug, and then install the drain plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 2.ADD TRANSFER OIL

a.
C282090C02
2.646,0.875 2.958,1.031 0.313,0.156 10 false *a
*a 0 to 5.0 mm


Add oil so that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

Oil grade:

Toyota Genuine Transfer Gear Oil LF or Equivalent


Viscosity:

SAE 75W


Standard capacity:

1.0 liters (1.1 US qts, 0.9 Imp. qts)


NOTICE:

Too much or too little oil will lead to transfer problems.



b.

Install a new gasket to the filler plug, and then install the filler plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)

NOTICE:
·

When adding transfer oil, make sure the vehicle is level.

·

An excessively large or small amount of oil may cause problems.

·

After adding oil, drive the vehicle and recheck the oil level.




c.

Inspect for transfer oil leaks.