Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Halogen Headlight)
RM3250E _59 Vehicle Exterior _038067 LIGHTING (EXT) _0186320 HEADLIGHT ASSEMBLY(for Halogen Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Halogen Headlight)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 85669 1.INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (w/ Headlight Leveling)

a.

Install a new headlight leveling motor base packing.


Hide 85662 2.INSTALL HEADLIGHT LEVELING MOTOR LH (w/ Headlight Leveling)

a.

Set the tip of the aiming screw of the headlight leveling motor LH onto the headlight unit.


b.

Tighten the aiming screw of the headlight leveling motor LH the same number of rotations recorded when removing it to connect the headlight leveling motor LH.


c.
E316883C01
1.865,1.219 2.198,1.625 true 2.229,1.552 2.458,1.74 0.229,0.188 10 true *a
*a Aiming Screw
V113147

Tighten in this Direction
V113148

Clockwise


Insert the headlight leveling motor LH.


d.

Turn the headlight leveling motor LH clockwise to install it.

HINT:

For the headlight assembly RH, turn the headlight leveling motor RH counterclockwise to install it.



e.

Tighten the aiming screw 20 rotations.


Hide 81510C 3.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.
E316868C01
1.073,2.135 1.469,2.135 false 2,2.146 2.396,2.146 false 0.896,2.042 1.208,2.198 0.313,0.156 10 false *a 2.448,2.042 2.76,2.198 0.313,0.156 10 false *a
*a Protrusion
V100135

Cutout


Align the 2 protrusions on the front turn signal light bulb with the 2 cutouts of the front turn signal light socket and insert the bulb.


b.
E316869C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Clockwise


While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.


Hide 81515B 4.INSTALL FRONT TURN SIGNAL LIGHT SOCKET

E316866C01
1.969,1.198 2.385,0.781 true 2.063,1.323 2.542,1.156 true 1.219,4.365 1.698,4.198 true 2.448,0.646 2.677,0.823 0.229,0.177 10 true *a 2.573,1.063 2.813,1.26 0.24,0.198 10 true *b 1.042,4.271 1.229,4.469 0.188,0.198 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


a.

Align the matchmark of the front turn signal light socket with the unlock position mark of the headlight unit, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket.


Hide 81610F 5.INSTALL CLEARANCE LIGHT BULB

a.

Install the clearance light bulb to the clearance light socket.


Hide 81615D 6.INSTALL CLEARANCE LIGHT SOCKET

E316863C01
2.094,0.458 1.438,1.104 true 1.698,1.604 1.313,1.198 true 1.219,3.625 0.75,3.438 true 2.125,0.333 2.354,0.531 0.229,0.198 10 true *a 1.677,1.635 1.865,1.813 0.188,0.177 10 true *b 0.583,3.333 0.771,3.521 0.188,0.188 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


a.

Align the matchmark of the clearance light socket with the unlock position mark of the headlight unit, and then rotate the clearance light socket clockwise until the lock position mark to install the clearance light socket.


Hide 81110B 7.INSTALL NO. 1 HEADLIGHT BULB

a.
E296813

Align the shaded area of the No. 1 headlight bulb shown in the illustration with the shaded area of the headlight unit and insert the No. 1 headlight bulb into the headlight unit.

NOTICE:

Do not touch the glass part of the No. 1 headlight bulb.



b.
E316861C01
0,0 0,0 false
V113147

Lock in this Direction


Lock the set spring by moving it in the direction indicated by the arrow in the illustration.


Hide 81144C 8.INSTALL HEADLIGHT SOCKET COVER

a.

Install the headlight socket cover to the headlight unit.