Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender)
RM3250E _59 Vehicle Exterior _038067 LIGHTING (EXT) _0186326 SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender) A

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81740 1.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

a.
E316919C01
0,0 0,0 false
V113147

Slide in this Direction
V100155

Protective Tape


Apply protective tape as shown in the illustration.


b.

Slide the side turn signal light assembly LH toward the front of the vehicle.


c.

Raise the side turn signal light assembly LH to detach the claw and remove it.


d.
E316921

Disconnect the connector.