Home › Vehicle Exterior › LIGHTING (EXT) › HEIGHT CONTROL SENSOR
RM3250E _59 Vehicle Exterior _038067 LIGHTING (EXT) _0186333 HEIGHT CONTROL SENSOR A

LIGHTING (EXT)  HEIGHT CONTROL SENSOR  INSTALLATION  


PROCEDURE

Hide 89408C 1.INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

NOTICE:

If the rear height control sensor sub-assembly LH has been dropped, replace it with a new one.


a.

Attach the wire harness clamp.


b.

Install the rear height control sensor sub-assembly LH with 3 new bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.

Connect the connector.


Hide 48923A 2.INSTALL HEIGHT CONTROL LINK COVER

a.

Install the height control link cover with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)