Home › Vehicle Exterior › DOOR / HATCH › HOOD
RM3250E _59 Vehicle Exterior _038077 DOOR / HATCH _0186364 HOOD G

DOOR / HATCH  HOOD  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 53301 1.INSPECT HOOD SUB-ASSEMBLY

a.

Check that the clearance measurements of areas A to D are within the standard ranges.

B405426N01
4.719,1.021 4.875,1.219 0.156,0.198 10 false D 2.583,0.177 2.74,0.375 0.156,0.198 10 false A 2.792,0.625 2.948,0.823 0.156,0.198 10 false B 4.865,0.24 5.021,0.438 0.156,0.198 10 false C

Standard:
Area Specified Condition Area Specified Condition
A 4.0 to 7.0 mm (0.157 to 0.276 in.) B -0.9 to 2.1 mm (-0.035 to 0.083 in.)
C 3.5 to 6.5 mm (0.138 to 0.256 in.) D -1.0 to 2.0 mm (-0.039 to 0.079 in.)