65759
1.REMOVE TAIL GATE SERVICE HOLE COVER
| *A | for A Deck |
| *B | for J Deck |
|
Remove in this Direction |
for A Deck:
Remove the 10 screws and tail gate service hole cover.
for J Deck:
Remove the 9 screws and tail gate service hole cover.
2.REMOVE SCREW GROMMET
for A Deck:
Detach the claw and remove the 10 screw grommets.
for J Deck:
Detach the claw and remove the 9 screw grommets.
81570
3.REMOVE CENTER STOP LIGHT ASSEMBLY
86790D
4.REMOVE REAR TELEVISION CAMERA ASSEMBLY (for A Deck, w/ Rear View Monitor System)
76811D
5.REMOVE REAR BODY TAIL GATE GARNISH (for J Deck, w/ Rear View Monitor System)
65797A
6.REMOVE TAIL GATE LOCK CONTROL LINK LH (for A Deck)
| *1 | Control Link Snap |
|
Remove in this Direction |
Rotate the control link snaps in the directions indicated by the arrows in the illustration and detach the control link snaps from the tail gate lock control link LH.
Remove the tail gate lock control link LH.
65797B
7.REMOVE TAIL GATE LOCK CONTROL LINK RH (for A Deck)
Use the same procedure described for the LH side.
69090B
8.REMOVE TAIL GATE HANDLE ASSEMBLY (for A Deck)
Remove the 4 bolts.
|
Remove in this Direction |
Remove the tail gate handle assembly as shown in the illustration.
65790A
9.REMOVE TAIL GATE LOCK ASSEMBLY LH (for A Deck)
Remove the 2 bolts.
Detach the guide and remove the tail gate lock assembly LH.
65780A
10.REMOVE TAIL GATE LOCK ASSEMBLY RH (for A Deck)
Use the same procedure described for the LH side.
65738A
11.REMOVE NO. 1 TAIL GATE LOCK HINGE STOPPER (for A Deck)
Use the same procedure for both No. 1 tail gate lock hinge stoppers.
Remove the bolt.
Detach the guide and remove the No. 1 tail gate lock hinge stopper.
66170
12.REMOVE REAR BODY TAIL GATE LATCH ASSEMBLY (for J Deck)
Use the same procedure for both rear body tail gate latch assemblies.
Remove the 2 bolts and rear body tail gate latch assembly.
66120F
13.REMOVE TAIL GATE HINGE ASSEMBLY LH
|
Bolt |
|
"TORX" Bolt |
Using a T40 "TORX" socket wrench, remove the 2 "TORX" bolts.
Remove the bolt and tail gate hinge assembly LH.
66110F
14.REMOVE TAIL GATE HINGE ASSEMBLY RH
Use the same procedure described for the LH side.
65778
15.REMOVE TAIL GATE STAY STOPPER
Use the same procedure for both tail gate stay stoppers.
Detach the claw and remove the tail gate stay stopper.