Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0187282 FRONT EVAPORATOR TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  FRONT EVAPORATOR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88625 1.INSPECT NO. 1 COOLER THERMISTOR (FRONT EVAPORATOR TEMPERATURE SENSOR)

a.
E292723C02
0.323,0.885 0.417,0.667 false 1.99,0.198 2.302,0.354 0.313,0.156 10 false *a 0.385,0.531 0.698,0.688 0.313,0.156 10 false *b 0.063,2.896 0.375,3.052 0.313,0.156 10 false *c 1.865,4.354 2.177,4.51 0.313,0.156 10 false *d
*a Component without harness connected
(No. 1 Cooler Thermistor (Front Evaporator Temperature Sensor))
*b Sensing Portion
*c Resistance (kΩ)
*d Temperature (°C (°F))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 -10°C (14°F) 7.30 to 9.10 kΩ
-5°C (23°F) 5.65 to 6.95 kΩ
0°C (32°F) 4.40 to 5.35 kΩ
5°C (41°F) 3.40 to 4.15 kΩ
10°C (50°F) 2.70 to 3.25 kΩ
15°C (59°F) 2.14 to 2.58 kΩ
20°C (68°F) 1.71 to 2.05 kΩ
25°C (77°F) 1.38 to 1.64 kΩ
30°C (86°F) 1.11 to 1.32 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensor may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (See the graph).


If the result is not as specified, replace the No. 1 cooler thermistor (front evaporator temperature sensor).