Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY(for TMT Made) › 2015.06–2016.03
RM3250E _52 Drivetrain _038038 DRIVE SHAFT / PROPELLER SHAFT _0187314 FRONT PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  FRONT PROPELLER SHAFT ASSEMBLY  REMOVAL  


PROCEDURE

Hide 51407A 1.INSTALL NO. 3 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Cover)

Hide 51561D 2.REMOVE PROPELLER SHAFT GUARD

a.
C317860

Remove the 2 bolts and propeller shaft guard.


b.
C330831

Remove the 2 bolts and propeller shaft guard bracket LH.

HINT:
·

Perform this procedure only when replacement of the propeller shaft guard bracket is necessary.

·

Use the same procedure for the RH and LH sides.




Hide 37140 3.REMOVE FRONT PROPELLER SHAFT ASSEMBLY

a.
C317859C01
1.885,1 2.583,1.688 2.583,1.688 2.031,0.99 true 2.625,1.635 2.938,1.833 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the propeller shaft flange and transfer flange.


b.

Remove the 4 nuts and 4 washers.


c.
C317858C01
1.615,1.521 2.427,1.927 2.427,1.927 1.615,1.354 true 2.51,1.833 2.823,2.031 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the propeller shaft flange and differential flange.


d.

Remove the 4 bolts, 4 nuts and 4 washers.


e.

Remove the front propeller shaft assembly.