To prevent burns, do not remove the engine oil level sensor while the engine is hot.
51410
1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY (for 4WD and Pre-Runner)
51442
2.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for 4WD and Pre-Runner)
3.DRAIN ENGINE OIL
89491
4.REMOVE ENGINE OIL LEVEL SENSOR
To prevent burns, do not remove the engine oil level sensor while the engine is hot.
Disconnect the engine oil level sensor connector.
Remove the 4 bolts and engine oil level sensor from oil pan sub-assembly.