Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH
RM3250E _51 Engine / Hybrid System _037980 CRUISE CONTROL _0187834 CRUISE CONTROL MAIN SWITCH G

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84632 1.INSPECT CRUISE CONTROL MAIN SWITCH

a.

Measure the resistance according to the value(s) in the table below.

E248011C05
0.531,2.927 0.823,2.583 true 1.781,2.927 1.427,2.583 true 2.594,2.76 3.031,2.958 0.438,0.198 10 false (CCS) 2.573,2.094 3,2.292 0.427,0.198 10 false (ECC) 3.823,2.417 4.323,2.646 0.5,0.229 10 false MAIN 4.531,2.406 5.042,2.615 0.51,0.208 10 false +RES 5.271,2.417 5.74,2.635 0.469,0.219 10 false -SET 5.99,2.438 6.698,2.656 0.708,0.219 10 false CANCEL 0.438,2.948 0.948,3.167 0.51,0.219 10 false CCS 1.635,2.948 2.052,3.167 0.417,0.219 10 false ECC 0.344,1.823 0.604,2 0.26,0.177 10 false *a
*a Component without harness connected
(Cruise Control Main Switch)
- -


Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (ECC) - 3 (CCS) Cruise control main switch (ON-OFF button) released 1 MΩ or higher
Cruise control main switch (ON-OFF button) pushed Below 2.5 Ω
+RES switch ON 236 to 244 Ω
-SET switch ON 618 to 642 Ω
CANCEL switch ON 1510 to 1570 Ω


If the result is not as specified, replace the cruise control main switch.