Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH › 2015.06–2016.03
RM3250E _51 Engine / Hybrid System _037980 CRUISE CONTROL _0187834 CRUISE CONTROL MAIN SWITCH A

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the cruise control main switch removal/installation are shown below.

CAUTION:
B403904

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.



PROCEDURE

Hide 45130 1.REMOVE HORN BUTTON ASSEMBLY

Hide 84632 2.REMOVE CRUISE CONTROL MAIN SWITCH

a.
A346023

Remove the 2 screws.


b.

Disconnect the connector and remove the cruise control main switch.


c.
B338904

Disconnect the connector and remove the cruise control switch wire from the cruise control main switch.