Home › Drivetrain › AC60F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE › 2015.06–2016.03
RM3250E _52 Drivetrain _038031 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0189265 TRANSMISSION WIRE A

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION WIRE  REMOVAL  


PROCEDURE

Hide 1.DRAIN AUTOMATIC TRANSMISSION FLUID

a.
C323944

Remove the drain plug and gasket from the automatic transmission assembly and drain the ATF.


b.

Install a new gasket and the drain plug to the automatic transmission assembly.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 35106 2.REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

a.
C323966

Remove the 10 bolts, automatic transmission oil pan sub-assembly and automatic transmission oil pangasket from the automatic transmission case sub-assembly.

NOTICE:

Some fluid will remain in the automatic transmission oil pan sub-assembly. Remove allof the bolts, and carefully remove the automatic transmission oil pan sub-assembly.



b.

Remove the 4 transmission oil cleaner magnets from the automatic transmission oil pan sub-assembly.


c.

Examine the particles in the automatic transmission oil pan sub-assembly.

i.

Collect any steel chips with the removed transmission oil cleaner magnets. Carefully inspect the foreign matter and particles in the automatic transmission oil pan sub-assembly and on the transmission oil cleaner magnets to anticipate the type of wear you will find in the automatic transmission assembly.

Steel (magnetic): bearing, gear and clutch plate wear

Brass (non-magnetic): bush wear



Hide 82125J 3.DISCONNECT TRANSMISSION WIRE

a.
C318506C05
2.198,1.229 2.365,0.302 2.365,0.302 2.615,0.302 true 2.115,1.198 1.958,0.417 1.958,0.417 1.76,0.417 true 0.656,2.927 0.854,2.927 0.854,2.927 1.083,2.313 true 1.948,3.083 1.604,3.083 1.604,3.083 1.198,2.406 true 2.708,0.25 3.031,0.51 0.323,0.26 10 false *1 1.521,0.333 1.833,0.531 0.313,0.198 10 false *2 0.458,2.854 0.771,3.052 0.313,0.198 10 false *2 2.042,3.021 2.354,3.219 0.313,0.198 10 false *1
*1 Temperature Sensor Clamp
*2 Temperature Sensor


Remove the 2 bolts and the 2 temperature sensor clamps, and disconnect the 2 temperature sensors.


b.

Disconnect the 7 solenoid valve connectors and transmission wire from the transmission valve body assembly.


Hide 35979B 4.REMOVE TRANSMISSION INSULATOR RH

a.
C324513

Remove the 6 bolts and transmission insulator RH from the automatic transmission assembly.


Hide 82125J 5.REMOVE TRANSMISSION WIRE

a.
C323968

Disconnect the transmission wire connector.

HINT:

Detach the claw, press down the lever, and disconnect the transmission wire connector.



b.

Remove the bolt and pull out the transmission wire from the automatic transmission case sub-assembly.


c.
C318508

Remove the O-ring from the connector of transmission wire.


d.
C181076

Remove the 2 O-rings from the 2 temperature sensors.