Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT
RM3250E _58 Vehicle Interior _038066 LIGHTING (INT) _0189510 PERSONAL LIGHT A

LIGHTING (INT)  PERSONAL LIGHT  REMOVAL  


PROCEDURE

Hide 81260A 1.REMOVE MAP LIGHT ASSEMBLY (PERSONAL LIGHT)

E344104C01
0,0 0,0 false
V113146

Insert Moulding Remover D Here
V113147

Remove in this Direction


a.

Insert moulding remover D at the position shown in the illustration and pull as shown to detach the clip.


b.
E344105C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Place your hands in the gap created during the above procedure and pull down to detach the clip as shown in the illustration.


c.

Disconnect the connector and remove the map light assembly (personal light).