Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT
RM3250E _58 Vehicle Interior _038066 LIGHTING (INT) _0189512 ROOM LIGHT A

LIGHTING (INT)  ROOM LIGHT  REMOVAL  


PROCEDURE

Hide 81240 1.REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Double Cab, for Smart Cab)

a.
E317498C01
0.458,1.208 0.938,1.333 true 0.271,1.094 0.49,1.25 0.219,0.156 10 true *a
*a Protective Tape
V113146

Insert Thin-bladed Screwdriver Here
V113147

Remove in this Direction


Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the No. 1 room light lens.

HINT:

Tape the thin-bladed screwdriver tip before use.



b.
E317501C01
0,0 0,0 false
V113146

Place Finger Here
V113147

Remove in this Direction


Place your finger at the position shown in the illustration and pull as shown to detach the claw.


c.
E317504C01
0.917,1.646 1.094,1.333 true 0.802,1.625 1,1.781 0.198,0.156 10 true *a
*a Protective Tape


Using a screwdriver, detach the claw and remove the No. 1 room light assembly from the No. 1 room light switch base.

HINT:

Tape the screwdriver tip before use.



Hide 81260A 2.REMOVE MAP LIGHT ASSEMBLY (ROOM LIGHT) (for Single Cab)

a.
E317498C01
0.458,1.208 0.938,1.333 true 0.271,1.094 0.49,1.25 0.219,0.156 10 true *a
*a Protective Tape
V113146

Insert Thin-bladed Screwdriver Here
V113147

Remove in this Direction


Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the map light lens.

HINT:

Tape the thin-bladed screwdriver tip before use.



b.
E317501C01
0,0 0,0 false
V113146

Place Finger Here
V113147

Remove in this Direction


Place your finger at the position shown in the illustration and pull as shown to detach the claw.


c.
E317504C01
0.917,1.646 1.094,1.333 true 0.802,1.625 1,1.781 0.198,0.156 10 true *a
*a Protective Tape


Using a screwdriver, detach the claw and remove the map light assembly (room light) from the map light switch base.

HINT:

Tape the screwdriver tip before use.