Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT
RM3250E _58 Vehicle Interior _038066 LIGHTING (INT) _0189514 IGNITION KEY CYLINDER LIGHT G

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 89782 1.INSPECT TRANSPONDER KEY COIL (IGNITION KEY CYLINDER LIGHT)

a.
E269162C01
1.24,1.74 1.531,1.26 true 2.167,1.729 1.896,1.26 true 0.094,0.083 0.406,0.24 0.313,0.156 10 *a 2.083,1.729 2.698,1.927 0.615,0.198 10 ILL+ 1.135,1.75 1.75,1.948 0.615,0.198 10 ILL-
*a Component without harness connected
(Transponder Key Coil (Ignition Key Cylinder Light))


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (ILL+)
Battery negative (-) → Terminal 4 (ILL-)
Illuminates


If the result is not as specified, replace the transponder key coil (ignition key cylinder light).