Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK
RM3250E _58 Vehicle Interior _038068 METER / GAUGE / DISPLAY _0189522 CLOCK G

METER / GAUGE / DISPLAY  CLOCK  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 83910G 1.INSPECT CLOCK ASSEMBLY

a.
B404049C01
2.115,1.396 2.708,1.24 true 1.302,1.927 1.448,1.521 true 0.115,0.063 0.427,0.219 0.313,0.156 10 false *a 1.156,1.948 1.771,2.146 0.615,0.198 10 false ILL+ 2.771,1.125 3.229,1.323 0.458,0.198 10 false ILL-
*a Component without harness connected
(Clock Assembly)


Check the illumination.

Apply battery voltage to the connector and check the illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 9 (ILL+)
Battery negative (-) → Terminal 6 (ILL-)
Illuminates


If the result is not as specified, replace the clock assembly.