Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55557A
1.INSTALL GLOVE COMPARTMENT DOOR CHECK CUSHION
Use the same procedure for both glove compartment door check cushions.
Attach the claw to install the glove compartment door check cushion.
55446A
2.INSTALL NO. 1 SWITCH HOLE BASE
Attach the claw to install the No. 1 switch hole base.
55618C
3.INSTALL INSTRUMENT PANEL CUP HOLDER (for Driver Side)
| *a | Clip <E> |
Attach the guide and clip to install the No. 1 instrument panel cup holder.
Install the clip <E>.
| *a | Screw <A> |
Install the 3 screws <A>.
55618C
4.INSTALL INSTRUMENT PANEL CUP HOLDER (for Passenger Side)
| *a | Clip <E> |
Attach the guide and clip to install the No. 1 instrument panel cup holder.
Install the clip <E>.
| *a | Screw <A> |
Install the 3 screws <A>.
55620
5.INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY (for Driver Side)
|
Install in this Direction |
Attach the claw to install the instrument panel cup holder assembly and instrument panel cup holder tray as shown in the illustration.
Attach the guide and claw to install the cover.
55620
6.INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY (for Passenger Side)
|
Install in this Direction |
Attach the claw to install the instrument panel cup holder assembly and instrument panel cup holder tray as shown in the illustration.