Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
58905
1.REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 3 screws.
Detach the claw and remove the console compartment door sub-assembly.
58908A
2.REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Remove the 2 screws and console compartment door lock sub-assembly.
58907
3.REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
for Type A:
Remove the 5 screws.
Detach the claw and remove the cover.
for Type B:
| *a | Protective Tape |
Using a thin-bladed screwdriver, detach the claw and remove the cover.
Tape the thin-bladed screwdriver tip before use.
Remove the 4 screws and console compartment door hinge sub-assembly.
58959B
4.REMOVE CONSOLE COMPARTMENT DOOR CUSHION
Use the same procedure for both console compartment door cushions.
Remove the console compartment door cushion.
58904B
5.REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
for Automatic Transmission:
Detach the guide and remove the parking brake hole cover sub-assembly.
for Manual Transmission:
Detach the guide and remove the parking brake hole cover sub-assembly.
58860A
6.REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/ Rear Register Duct)
Detach the claw and remove the duct.
Remove the 4 screws and console box register assembly.
58921A
7.REMOVE UPPER REAR CONSOLE PANEL (w/ Rear Register Duct)
Detach the claw and remove the upper rear console panel.
58881E
8.REMOVE NO. 1 CONSOLE BOX AIR DAMPER SEAL (w/ Rear Register Duct)
Remove the No. 1 console box air damper seal.
58840A
9.REMOVE SHIFTING HOLE COVER ASSEMBLY (for Manual Transmission)
Detach the claw and remove the shifting hole cover assembly.
58844
10.REMOVE CONSOLE BOX BEZEL (for Manual Transmission)
Detach the claw and remove the console box bezel.