Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX(w/ Console Box Lid)
RM3250E _58 Vehicle Interior _037970 INTERIOR PANELS / TRIM _0189526 FRONT CONSOLE BOX(w/ Console Box Lid) A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX(w/ Console Box Lid)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 58844 1.INSTALL CONSOLE BOX BEZEL (for Manual Transmission)

a.
B404032

Attach the claw to install the console box bezel.


Hide 58840A 2.INSTALL SHIFTING HOLE COVER ASSEMBLY (for Manual Transmission)

a.
B404031

Attach the claw to install the shifting hole cover assembly.


Hide 58881E 3.INSTALL NO. 1 CONSOLE BOX AIR DAMPER SEAL (w/ Rear Register Duct)

a.
B404037

Remove the peeling paper from a new No. 1 console box air damper seal and press firmly to install the No. 1 console box air damper seal in the position shown in the illustration.


Hide 58921A 4.INSTALL UPPER REAR CONSOLE PANEL (w/ Rear Register Duct)

a.
B404036

Attach the claw to install the upper rear console panel.


Hide 58860A 5.INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/ Rear Register Duct)

a.
B404035

Install the console box register assembly with the 4 screws.


b.
B404034

Attach the claw to install the duct.


Hide 58904B 6.INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

a.

for Automatic Transmission:

i.
B413084

Attach the guide to install the parking brake hole cover sub-assembly.



b.

for Manual Transmission:

i.
B413083

Attach the guide to install the parking brake hole cover sub-assembly.



Hide 58959B 7.INSTALL CONSOLE COMPARTMENT DOOR CUSHION

HINT:

Use the same procedure for both console compartment door cushions.


a.
B413082

Install the console compartment door cushion.


Hide 58907 8.INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY

a.
B413081

Install the console compartment door hinge sub-assembly with the 4 screws.


b.

for Type A:

i.
B413078

Attach the claw to install the cover.


ii.

Install the 5 screws.



c.
B413080

for Type B:

i.

Attach the claw to install the cover.



Hide 58908A 9.INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

a.
B413077

Install the console compartment door lock sub-assembly with the 2 screws.


Hide 58905 10.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

a.
B413076N01
1.875,1.74 2.031,1.917 0.156,0.177 10 true 2 1.052,1.281 1.208,1.458 0.156,0.177 10 true 1 2.625,1.115 2.781,1.292 0.156,0.177 10 true 3

Attach the claw to install the console compartment door sub-assembly.


b.

Install the 3 screws.

HINT:
·

Before installing the screws, make sure to close the lid of the console compartment door sub-assembly.

·

Make sure to install the screws in the order shown in the illustration.