Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
82171
1.INSTALL NO. 1 ROOF WIRE
Fix the No. 1 roof wire in place with tape as shown in the illustration.
Align the tape with the markings when attaching it.
| *a | Marking |
|
Tape |
63342
2.INSTALL NO. 2 ROOF SILENCER PAD
| *a | Silencer Marking |
Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.
63341
3.INSTALL NO. 1 ROOF SILENCER PAD
| *a | Silencer Marking |
Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.