Home › Brake › BRAKE (FRONT) › FRONT BRAKE(for 16 inch Front Disc Brake 2WD)
RM3250E _54 Brake _038046 BRAKE (FRONT) _0189602 FRONT BRAKE(for 16 inch Front Disc Brake 2WD) A

BRAKE (FRONT)  FRONT BRAKE(for 16 inch Front Disc Brake 2WD)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 47547B 1.TEMPORARILY INSTALL FRONT DISC BRAKE BLEEDER PLUG

a.

Temporarily install the front disc brake bleeder plug to the disc brake cylinder assembly LH.

HINT:

The front disc brake bleeder plug will be tightened to the torque specification in the "Bleed Brake Line" procedure.



Hide 31478B 2.INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 3.INSTALL PISTON SEAL

a.
C321900C01
0,0 0,0 false
V100155

Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to a new piston seal.


b.

Install the piston seal to the disc brake cylinder assembly LH.

NOTICE:

Securely install the piston seal into the groove of the disc brake cylinder assembly LH.



Hide 47731 4.INSTALL FRONT DISC BRAKE PISTON

a.
C321901C01
0,0 0,0 false
V100155

Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to the inner and outer circumference of a new cylinder boot, and the entire circumference of the top and bottom of the outer edge as shown in the illustration.


b.

Apply a light coat of lithium soap base glycol grease to the entire outer circumference of the front disc brake piston where it contacts the cylinder boot and disc brake cylinder assembly LH.


c.

Install the cylinder boot to the front disc brake piston.


d.

Install the front disc brake piston to the disc brake cylinder assembly LH.

NOTICE:

Do not forcibly install the front disc brake piston to the disc brake cylinder assembly LH.



Hide 5.INSTALL CYLINDER BOOT

a.
C321885C01
1.802,0.635 2.49,0.635 true 1.333,0.896 0.99,0.896 false 2.542,0.563 2.74,0.75 0.198,0.188 10 false *1 0.792,0.844 0.969,1.021 0.177,0.177 10 false *2
*1 Cylinder Boot
*2 Front Disc Brake Piston


Install the cylinder boot to the disc brake cylinder assembly LH.

NOTICE:

Securely install the cylinder boot to the groove of the disc brake cylinder assembly LH.