Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE(for 2WD with ABS)
RM3250E _54 Brake _038047 BRAKE (REAR) _0189610 REAR BRAKE FLEXIBLE HOSE(for 2WD with ABS) A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE(for 2WD with ABS)  REMOVAL  


PROCEDURE

Hide 1.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 47321B 2.REMOVE REAR BRAKE TUBE FLEXIBLE HOSE

a.
C323390

Using a union nut wrench, disconnect the brake tube from the rear brake tube flexible hose while holding the rear brake tube flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




b.

Remove the 2 clips.


c.

Remove the rear brake tube flexible hose.


d.
C323391

Using a union nut wrench, disconnect the brake tube from the rear brake tube flexible hose while holding the rear brake tube flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




e.

Remove the 2 clips.


f.

Remove the rear brake tube flexible hose.


Hide 47356 3.REMOVE NO. 6 FLEXIBLE HOSE BRACKET

a.
C323392

Remove the bolt and No. 6 flexible hose bracket from the rear axle housing.


Hide 47355A 4.REMOVE NO. 5 FLEXIBLE HOSE BRACKET

a.

Detach the brake tube clamp from the No. 5 flexible hose bracket.


b.
C323393

Remove the 3 bolts and No. 5 flexible hose bracket.


c.
C323394

Remove the 2 bolts and disconnect the No. 5 flexible hose bracket.