Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECM
RM3250E _51 Engine / Hybrid System _037990 1KD-FTV ENGINE CONTROL _0189614 ECM A

1KD-FTV ENGINE CONTROL  ECM  INSTALLATION  


PROCEDURE

Hide 89668A 1.INSTALL NO. 2 ECM BRACKET

a.

Install the No. 2 ECM bracket with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 89667A 2.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 1 ECM bracket with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 89530C 3.INSTALL TRANSMISSION CONTROL ECU (for Automatic Transmission)

Hide 89533 4.INSTALL 4WD CONTROL ECU

Hide 89661 5.INSTALL ECM

a.

Install the ECM, No. 1 and No. 2 ECM bracket with the bolt and 2 nuts.

Torque:
for bolt : 8.0 N*m (82 kgf*cm, 71 in.*lbf)
for nut : 5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Connect the 2 4WD control ECU connector and 4 ECM connectors.


c.

for Automatic Transmission:

Connect the 2 transmission control ECU connector and 4 ECM connectors.


d.

Attach the clamp.


Hide 55510 7.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 8.PERFORM REGISTRATION

Click hereEngine / Hybrid System>1KD-FTV ENGINE CONTROL>ECD SYSTEM>REGISTRATION

HINT:

Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.

·

ECM and Fuel Supply Pump

·

ECM and Diesel Throttle Body Assembly

·

ECM and Injector Assembly

·

ECM and Engine Assembly