Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM3250E _51 Engine / Hybrid System _037990 1KD-FTV ENGINE CONTROL _0189618 CRANKSHAFT POSITION SENSOR A

1KD-FTV ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51442 2.REMOVE NO. 2 ENGINE UNDER COVER

Hide 11301L 3.REMOVE CRANKSHAFT POSITION SENSOR

a.

Disconnect the crankshaft position sensor connector.


b.

Detach the 4 clamps.

A349176


c.

Remove the bolt and crankshaft position sensor from the timing gear cover.