Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM3250E _51 Engine / Hybrid System _038013 2KD-FTV ENGINE CONTROL _0189628 CRANKSHAFT POSITION SENSOR A

2KD-FTV ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 11301L 2.REMOVE CRANKSHAFT POSITION SENSOR

a.

Disconnect the crankshaft position sensor connector.


b.

Detach the 4 clamps.

A349176


c.

Remove the bolt and crankshaft position sensor from the timing gear cover.