Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM3250E _51 Engine / Hybrid System _038013 2KD-FTV ENGINE CONTROL _0189629 ENGINE COOLANT TEMPERATURE SENSOR A

2KD-FTV ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422C 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.

Install a new gasket to the engine coolant temperature sensor.


b.

Install the engine coolant temperature sensor to the cylinder head sub-assembly.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


c.

Connect the engine coolant temperature sensor connector.


Hide 3.INSPECT FOR COOLANT LEAK

Hide 51441 4.INSTALL NO. 1 ENGINE UNDER COVER