Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM3250E _51 Engine / Hybrid System _038013 2KD-FTV ENGINE CONTROL _0189629 ENGINE COOLANT TEMPERATURE SENSOR A

2KD-FTV ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 89422C 3.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A349177

Disconnect the engine coolant temperature sensor connector.


b.

Remove the engine coolant temperature sensor from the cylinder head sub-assembly.


c.

Remove the gasket from the engine coolant temperature sensor.