22204
1.INSPECT INTAKE MASS AIR FLOW METER SUB-ASSEMBLY
Read the value using the GTS (MAF).
Perform the inspection of the intake mass air flow meter sub-assembly while it is installed to the air cleaner cap sub-assembly (installed to the vehicle).
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Data List / MAF.
| Tester Display |
|---|
| MAF |
Wait for 30 seconds, and read the value on the GTS.
Click hereEngine / Hybrid System>1GD-FTV ENGINE CONTROL>ECD SYSTEM>DATA LIST / ACTIVE TEST
w/ DPF:
Click hereEngine / Hybrid System>1GD-FTV ENGINE CONTROL>ECD SYSTEM(w/ DPF)>DATA LIST / ACTIVE TEST
If the result is not as specified, replace the intake mass air flow meter sub-assembly.
If the result is within the specified range, inspect the intake mass air flow meter sub-assembly.
Click hereEngine / Hybrid System>1GD-FTV ENGINE CONTROL>MASS AIR FLOW METER>INSPECTION