Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 1TR-FE, 2TR-FE)
RM3250E _55 Steering _038049 POWER ASSIST SYSTEMS _0190433 VANE PUMP(for 1TR-FE, 2TR-FE) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1TR-FE, 2TR-FE)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, place aluminum plates between the part and vise.

·

When using a vise, do not overtighten it.



PROCEDURE

Hide 44305 1.REMOVE VANE PUMP OIL RESERVOIR CAP SUB-ASSEMBLY

Hide 44306 2.REMOVE VANE PUMP OIL RESERVOIR SUB-ASSEMBLY

a.

Remove the 3 bolts and oil reservoir sub-assembly from the front housing.


b.

Remove the O-ring from the vane pump oil reservoir sub-assembly.


Hide 44320 3.SECURE VANE PUMP ASSEMBLY

a.
C324314N01
1.844,1.458 2.313,1.281 false 2.354,1.208 2.813,1.406 0.458,0.198 10 false SST

Using SST, secure the vane pump assembly.

SST
09630-00014  (09631-00132)


Hide 4.REMOVE FLOW CONTROL VALVE

a.
C324315

Using a 27 mm socket wrench, remove the pressure port union from the front housing.


b.

Using a screwdriver, remove the O-ring from the pressure port union.


c.

Remove the flow control valve from the front housing.


d.

Remove the flow control valve compression spring from the front housing.


Hide 89438 5.REMOVE POWER STEERING OIL PRESSURE SWITCH

a.

Remove the power steering oil pressure switch from the front housing.


b.

Remove the O-ring from the power steering oil pressure switch.


Hide 6.REMOVE REAR HOUSING

a.
C324316

Remove the 4 bolts and rear housing from the front housing.


b.

Remove the O-ring from the rear housing.


Hide 7.REMOVE SHAFT WITH PULLEY

a.
C324317

Using a screwdriver, remove the vane pump shaft snap ring from the shaft with pulley.


b.

Remove the shaft with pulley from the front housing.


Hide 8.REMOVE VANE PUMP ROTOR

a.

Remove the 10 vane pump plates from the vane pump rotor.

NOTICE:

Be careful not to drop the vane pump plates.



b.

Remove the vane pump rotor from the front housing.


Hide 9.REMOVE VANE PUMP CAM RING

Hide 44341 10.REMOVE FRONT VANE PUMP SIDE PLATE

a.

Remove the front vane pump side plate from the front housing.


b.
C324318

Remove the O-ring from the front vane pump side plate.


c.
C324319

Remove the O-ring from the front housing.


Hide 44302A 11.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C324320C01
1.406,0.719 1.771,0.948 true 1.219,0.594 1.531,0.792 0.313,0.198 10 false *a
*a Protective Tape


Using a screwdriver, pry out the vane pump housing oil seal.

HINT:

Tape the screwdriver tip before use.