Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 1TR-FE, 2TR-FE)
RM3250E _55 Steering _038049 POWER ASSIST SYSTEMS _0190433 VANE PUMP(for 1TR-FE, 2TR-FE) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1TR-FE, 2TR-FE)  INSTALLATION  


PROCEDURE

Hide 44320 1.INSTALL VANE PUMP ASSEMBLY

a.

Install the vane pump assembly with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


b.

Connect the connector to the power steering oil pressure switch.


Hide 44410 2.CONNECT PRESSURE FEED TUBE ASSEMBLY

a.

Install a new gasket and the pressure feed tube assembly to the vane pump assembly with the union bolt.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)

HINT:

Make sure that the stopper of the pressure feed tube touches the front housing.



Hide 3.CONNECT RETURN HOSE

a.

Connect the return hose to the oil reservoir sub-assembly and slide the hose clamp.


Hide 16361A 4.INSTALL FAN AND GENERATOR V BELT

Hide 5.ADD POWER STEERING FLUID

Hide 7.CHECK FOR FLUID LEAKS