Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 1GD-FTV, 2GD-FTV)
RM3250E _55 Steering _038049 POWER ASSIST SYSTEMS _0190434 VANE PUMP(for 1GD-FTV, 2GD-FTV) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1GD-FTV, 2GD-FTV)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, place aluminum plates between the part and vise.

·

When using a vise, do not overtighten it.



PROCEDURE

Hide 44320 1.SECURE VANE PUMP ASSEMBLY

a.
C322708C01
2.052,1.354 2.448,1.188 true 2.521,1.094 2.979,1.292 0.458,0.198 10 false SST

Using a SST, secure the vane pump assembly.

SST
09630-00014  (09631-00132)


Hide 2.REMOVE FLOW CONTROL VALVE

a.
C322709

Using a 27 mm socket wrench, remove the pressure port union from the front housing.


b.

Using a screwdriver, remove the O-ring from the pressure port union.


c.

Remove the flow control valve from the front housing.


d.

Remove the flow control valve compression spring from the front housing.


Hide 44337 3.REMOVE POWER STEERING SUCTION PORT UNION

a.

Remove the bolt and suction port union from the vane pump assembly.


b.

Remove the O-ring from the suction port union.


Hide 4.REMOVE REAR HOUSING

a.
C322710

Remove the 4 bolts and rear housing from the front housing.


b.

Remove the O-ring from the rear housing.


Hide 5.REMOVE SHAFT WITH PULLEY

a.
C322711

Using a screwdriver, remove the vane pump shaft snap ring from the shaft with pulley.


b.

Remove the shaft with pulley from the front housing.


Hide 6.REMOVE VANE PUMP ROTOR

a.

Remove the 10 vane pump plates from the vane pump rotor.

NOTICE:

Be careful not to drop the vane pump plates.



b.

Remove the vane pump rotor from the front housing.


Hide 7.REMOVE VANE PUMP CAM RING

Hide 44341 8.REMOVE FRONT VANE PUMP SIDE PLATE

a.

Remove the front vane pump side plate from the front housing.


b.
C322712

Remove the O-ring from the front vane pump side plate.


c.
C322713

Remove the O-ring from the front housing.


Hide 44302A 9.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C323291C01
1.083,0.26 1.677,0.594 true 0.906,0.135 1.219,0.292 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver, pry out the vane pump housing oil seal.

HINT:

Tape the screwdriver tip before use.