Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(w/o ABS)
RM3250E _54 Brake _038045 BRAKE SYSTEM (OTHER) _0190627 BRAKE MASTER CYLINDER(w/o ABS) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(w/o ABS)  DISASSEMBLY  


PROCEDURE

Hide 47220D 1.REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

a.

Mount the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.



b.

Using a pin punch and hammer, remove the pin from the brake master cylinder reservoir assembly.

NOTICE:

Do not drop the brake master cylinder reservoir assembly.



c.

Remove the brake master cylinder reservoir assembly from the brake master cylinder body.


d.

Remove the brake master cylinder body from the vise.


Hide 47255 2.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.

Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.


Hide 47287 3.REMOVE BRAKE FLUID INFORMATION LABEL

Hide 47230 4.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

a.

Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.


Hide 47299 5.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER

a.

Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.