Home › Engine / Hybrid System › 2GD-FTV ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM3250E _51 Engine / Hybrid System _038005 2GD-FTV ENGINE CONTROL _0192292 CAMSHAFT POSITION SENSOR A

2GD-FTV ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11401G 2.REMOVE CAMSHAFT POSITION SENSOR

a.
A346003

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.