Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE(for 2WD without ABS)
RM3250E _54 Brake _038047 BRAKE (REAR) _0192381 REAR BRAKE FLEXIBLE HOSE(for 2WD without ABS) A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE(for 2WD without ABS)  REMOVAL  


PROCEDURE

Hide 1.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 47321B 2.REMOVE REAR BRAKE TUBE FLEXIBLE HOSE

C334208

a.

Disconnect the brake tube and 3-way from the rear brake tube flexible hose with a union nut wrench while holding the rear brake tube flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube and 3-way from the connecting points.




b.

Remove the clip and rear brake tube flexible hose.