Home › Engine / Hybrid System › 2KD-FTV ENGINE MECHANICAL › DRIVE BELT
RM3250E _51 Engine / Hybrid System _038014 2KD-FTV ENGINE MECHANICAL _0193252 DRIVE BELT A

2KD-FTV ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.

Rotate the V-ribbed belt tensioner pulley clockwise, and then install the fan and generator V belt.

NOTICE:

Make sure that the fan and generator V belt is set properly on each pulley.



b.

Check that the indicator mark of the V-ribbed belt tensioner assembly.

Click hereEngine / Hybrid System>2KD-FTV ENGINE MECHANICAL>DRIVE BELT>ON-VEHICLE INSPECTION