Home › Engine / Hybrid System › 2KD-FTV ENGINE MECHANICAL › CYLINDER BLOCK
RM3250E _51 Engine / Hybrid System _038014 2KD-FTV ENGINE MECHANICAL _0193262 CYLINDER BLOCK A

2KD-FTV ENGINE MECHANICAL  CYLINDER BLOCK  REPAIR  


PROCEDURE

Hide 1.BORE CYLINDER

HINT:
·

Bore all 4 cylinders for the O/S piston outside diameter.

·

Replace all the piston rings with ones to match the O/S pistons.



a.

Prepare 4 new O/S pistons.

Standard Piston Diameter:

92.42 to 92.45 mm (3.6386 to 3.6398 in.)



b.
A256569C11
2.031,0.708 2.031,1.667 true 1.542,0.438 1.333,0.167 1.333,0.167 1.167,0.167 true 2.24,0.604 2.667,0.333 2.667,0.333 2.813,0.333 true 2.802,1.365 3.115,1.563 0.313,0.198 10 false *d 0.979,0.073 1.229,0.25 0.25,0.177 10 false *a 1.979,1.708 2.302,1.906 0.323,0.198 10 false *b 2.854,0.229 3.135,0.427 0.281,0.198 10 false *c
*a Size Mark
*b Piston Pin Hole Inside Diameter Mark
*c Front Mark (Arrow)
*d Distance


Using a micrometer, measure the piston diameter according to the following conditions: 1) measure at a right angle to the piston center line, and 2) measure at the indicated distance from the piston head.

Standard distance:

65 mm (2.56 in.)



c.

Calculate how much each cylinder needs to be rebored:

Size to be rebored:

Size to be rebored = P + C - H

P = Piston diameter

C = Piston clearance: 0.07 to 0.09 mm (0.00276 to 0.00354 in.)

H = Allowance for honing: 0.02 mm (0.000787 in.) or less



d.

Bore and hone the cylinders to the calculated dimensions.

Maximum honing:

0.02 mm (0.000787 in.)


NOTICE:

Excess honing will destroy the finished roundness.