Home › Engine / Hybrid System › 2GD-FTV COOLING › THERMOSTAT
RM3250E _51 Engine / Hybrid System _038010 2GD-FTV COOLING _0193414 THERMOSTAT A

2GD-FTV COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 16711 1.REMOVE FAN SHROUD

Hide 2.REMOVE WATER HOSE SUB-ASSEMBLY (w/ Viscous Heater)

Hide 16207 3.DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A341230

Remove the 2 bolts and disconnect the No. 2 water by-pass pipe sub-assembly from the engine water pump assembly and water inlet.


Hide 16572D 4.DISCONNECT NO. 2 RADIATOR HOSE

a.
A343612

w/ Air Conditioning System without Viscous Heater:

Remove the bolt and disconnect the suction hose sub-assembly from the water inlet.


b.

Slide the hose clamp and disconnect the No. 2 radiator hose from the water inlet.


Hide 16321 5.REMOVE WATER INLET

a.
A341231

Remove the 3 bolts and water inlet.


Hide 16331A 6.REMOVE THERMOSTAT

a.

Remove the thermostat from the engine water pump assembly.


b.

Remove the gasket from the thermostat.