Home › Engine / Hybrid System › 2TR-FE FUEL › FUEL PUMP(for Short Wheelbase)
RM3250E _51 Engine / Hybrid System _038023 2TR-FE FUEL _0193803 FUEL PUMP(for Short Wheelbase) A

2TR-FE FUEL  FUEL PUMP(for Short Wheelbase)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>2TR-FE FUEL>FUEL SYSTEM>PRECAUTION


PROCEDURE

Hide 83320 1.REMOVE FUEL SENDER GAUGE ASSEMBLY

Hide 77131C 2.REMOVE NO. 1 FUEL SUB-TANK

a.
A350524

Disconnect the fuel pump connector and wire harness.


b.
A350525

Using a small screwdriver, detach the claw on the end of the tube from the claw hole. Disconnect the tube from the clamp.


c.
A350526

Disconnect the 2 fuel tubes and wire harness.


d.
A350527

Using a screwdriver, detach the 3 claws from the claw holes.

HINT:

Tape the screwdriver tip before use.



e.
A350528

Using a screwdriver, detach the 2 claws from the claw holes and remove the No. 1 fuel sub-tank.

NOTICE:

Do not damage the No. 1 fuel sub-tank.


HINT:

Tape the screwdriver tip before use.



Hide 23220A 3.REMOVE FUEL PUMP

a.
A350529

Using a screwdriver, detach the 3 claws from the claw holes and disconnect the fuel pump.

HINT:

Tape the screwdriver tip before use.



b.
A350530

Disconnect the fuel pump connector and remove the fuel pump harness.


c.
A344553C01
2.052,2.104 2.427,2.104 false 2.063,2.365 2.26,2.521 2.26,2.521 2.438,2.521 false 2.469,2.031 2.729,2.198 0.26,0.167 10 false *1 2.479,2.438 2.698,2.646 0.219,0.208 10 false *2
*1 O-Ring
*2 Spacer


Remove the O-ring and spacer from the fuel pump.