Home › General › SPECIFICATIONS › 2TR-FE INTAKE / EXHAUST
RM3250E _V1 General _038082 SPECIFICATIONS _0176453 2TR-FE INTAKE / EXHAUST F

SPECIFICATIONS  2TR-FE INTAKE / EXHAUST  TORQUE SPECIFICATIONS  


INTAKE MANIFOLD
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
for LHD:
Wire harness clamp bracket x Intake manifold
13 133 10
for RHD:
Wire harness clamp bracket x Intake manifold
for bolt A 13 133 10
for bolt B 30 306 22
Intake manifold x Cylinder head sub-assembly 25 255 18
Water by-pass pipe sub-assembly x Intake manifold 5.4 55 48

EXHAUST MANIFOLD
Part Tightened N*m kgf*cm ft.*lbf
Exhaust manifold x Cylinder head sub-assembly 36 367 27
Manifold stay x Exhaust manifold, Manual transmission for bolt A 71.5 729 53
for bolt B 44 449 32
for bolt C 30 306 22
Manifold stay x Exhaust manifold, Automatic transmission for bolt A 71 724 52
for bolt B 44 449 32
for bolt C 30 306 22
No. 1 exhaust manifold heat insulator x Exhaust manifold 12 122 9
Front exhaust pipe assembly x Exhaust manifold 43 438 32
Front exhaust pipe assembly x Tail exhaust pipe assembly 43 438 32

EXHAUST PIPE
Part Tightened N*m kgf*cm ft.*lbf
Front exhaust pipe assembly x Exhaust manifold 43 438 32
Tail exhaust pipe assembly x Front exhaust pipe assembly 43 438 32