These DTCs are stored when the CAN communication system is malfunctioning.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0129 | Lost Communication with Brake System Control Module | Lost communication with brake actuator assembly (skid control ECU) | CAN communication system |
| U0142 | Lost Communication with Body Control Module "B" | Lost communication with body ECU (combination meter) | CAN communication system |
Clear the DTCs.
Click hereVehicle Exterior>WIPER / WASHER>WIPER AND WASHER SYSTEM>DTC CHECK / CLEAR
Check for DTCs.
Click hereVehicle Exterior>WIPER / WASHER>WIPER AND WASHER SYSTEM>DTC CHECK / CLEAR
DTCs U0129, U0142 are not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG