Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
RM3250E _59 Vehicle Exterior _038076 WIPER / WASHER _0184382 WIPER AND WASHER SYSTEM U

WIPER / WASHER  WIPER AND WASHER SYSTEM  FAIL-SAFE CHART  


HINT:

w/ Automatic Headlight Beam Level Control System:

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM>FAIL-SAFE CHART


Headlight Cleaner System (w/o Automatic Headlight Beam Level Control System)


a.

The headlight leveling ECU assembly operates in fail-safe mode if an abnormal condition such as those listed below has been detected.

Item Abnormality Detection Condition Return Condition Warning Light
High power source voltage Abnormal high power source voltage (18.5 V or more) is detected. Voltage of 17.5 V or less is detected Not illuminated
Low power source voltage Abnormal low power source voltage (9.0 V or less) is detected. Voltage of 9.3 V or more is detected Not illuminated
CAN communication malfunction Abnormal CAN communication line is detected. Repair or replace CAN communication line Not illuminated
Headlight leveling ECU assembly malfunction Malfunction of headlight leveling ECU assembly is detected. Replace headlight leveing ECU assembly Illuminated