Home › General › SPECIFICATIONS › POWER ASSIST SYSTEMS › 2015.06–2016.01
RM3250E _V1 General _038082 SPECIFICATIONS _0176510 POWER ASSIST SYSTEMS F

SPECIFICATIONS  POWER ASSIST SYSTEMS  TORQUE SPECIFICATIONS  


Vane Pump (for 1GR-FE)
Part Tightened N*m kgf*cm ft.*lbf
Vane pump assembly x Engine 21 214 15
Pressure feed tube assembly set union bolt 49 500 36
Power steering oil pressure switch (for 2WD) 21 214 15
Pressure port union 69 704 51
Power steering suction port union set bolt 12 122 9
Front housing x Rear housing 22 224 16

Vane Pump (for GD Engine)
Part Tightened N*m kgf*cm ft.*lbf
Vane pump assembly x Engine 21 214 15
Pressure feed tube assembly set union bolt 49 500 36
Pressure port union 69 704 51
Power steering suction port union set bolt 12 122 9
Front housing x Rear housing 22 224 16

Vane Pump (for KD Engine)
Part Tightened N*m kgf*cm ft.*lbf
Vane pump assembly x Engine 39 398 29
Pressure feed tube assembly set union nut with out union nut wrench 44 449 32
with union nut wrench 40.5 413 30
Pressure port union 69 704 51
Power steering suction port union set bolt 12 122 9
Front housing x Rear housing 22 224 16

Vane Pump (for TR Engine)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Vane pump assembly x Engine 21 214 15
Pressure feed tube assembly set union bolt 49 500 36
Vane pump oil reservoir sub-assembly x Front housing 9.0 92 80
Pressure port union 69 704 51
Power steering oil pressure switch 21 214 15
Front housing x Rear housing 22 224 16