Home › General › SPECIFICATIONS › STEERING GEAR / LINKAGE
RM3250E _V1 General _038082 SPECIFICATIONS _0176512 STEERING GEAR / LINKAGE F

SPECIFICATIONS  STEERING GEAR / LINKAGE  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf
Steering sliding yoke x No. 2 intermediate shaft sub-assembly 35 357 26
No. 2 intermediate shaft sub-assembly x Power steering link assembly 35 357 26
Tie rod end sub-assembly x Front axle hub assembly (for 2WD) 49 500 36
Tie rod end sub-assembly x Front axle hub assembly (for 4WD and Pre-Runner) 91 928 67
Pressure feed tube bracket x Power steering link assembly 28 286 21
Front suspension member x Power steering link assembly 130 1326 96
Pressure feed tube assembly x Power steering link assembly with out union nut wrench 25 255 18
with union nut wrench 21.4 218 16
Steering gear outlet return tube with out union nut wrench 25 255 18
with union nut wrench 21.4 218 16
Steering turn pressure tube union nut with out union nut wrench 12.5 127 9
with union nut wrench 11.1 113 8
Steering turn pressure tube set union bolt 29.4 300 22
Tie rod end lock nut with out SST 60.6 618 45
with SST 44.7 456 33