Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 5L-E) › 2016.01–2016.08
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0239520 COMPRESSOR(for 5L-E) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 5L-E)  DISASSEMBLY  


PROCEDURE

Hide 88688N 1.REMOVE COOLER BRACKET

a.
E336796

Remove the screw.


b.

Detach the clamp and remove the cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

a.
E336797C01
1.115,0.875 1.115,0.208 1.115,0.208 1.417,0.208 false 1.458,0.146 1.771,0.302 0.313,0.156 10 false *a
*a SST


Clamp the compressor assembly with magnet clutch in a vise between aluminum plates.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers that are used for adjusting clutch clearance.



d.
E336798

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.
E336799

Using a snap ring expander, remove the snap ring and magnet clutch stator.