Home › Engine / Hybrid System › 5L-E FUEL › FUEL INJECTION PUMP › from 2016.01
RM3250E _51 Engine / Hybrid System _049912 5L-E FUEL _0242563 FUEL INJECTION PUMP A

5L-E FUEL  FUEL INJECTION PUMP  DISASSEMBLY  


PROCEDURE

Hide 22100 1.MOUNT INJECTION PUMP ASSEMBLY

a.
A370251N01
1.979,0.729 2.625,0.729 true 1.813,1.646 2.458,1.646 true 2.698,0.646 3.156,0.844 0.458,0.198 10 false SST 2.542,1.563 3,1.76 0.458,0.198 10 false SST

Mount the injection pump assembly on SST.

SST
09241-76022  
09245-54010  


Hide 23764 2.REMOVE NO. 4 NOZZLE LEAKAGE PIPE

a.
A370253

Remove the overflow screw sub-assembly, No. 4 nozzle leakage pipe and 2 air bleeder nipple washers from the injection pump assembly.


Hide 23811 3.REMOVE FUEL FILTER TO INJECTION PUMP FUEL PIPE

a.
A370252

Remove the cap nut, fuel filter to injection pump fuel pipe and 2 air bleeder nipple washers from the injection pump assembly.


b.

Remove the screw and air bleeder nipple washer from the injection pump assembly.


Hide 4.REMOVE WIRING HARNESS BRACKET

a.
A370254

Remove the bolt and wiring harness bracket from the injection pump assembly.


Hide 23010 5.REMOVE TIMING CONTROL VALVE ASSEMBLY

a.
A370255

Using a 5 mm hexagon wrench, remove the 2 bolts and timing control valve assembly from the injection pump assembly.


Hide 22176 6.REMOVE DISTRIBUTIVE HEAD PLUG

a.
A370256N01
2.063,1.344 2.656,1.177 2.656,1.177 2.896,1.177 true 2.958,1.094 3.292,1.281 0.333,0.188 10 false SST

Using SST, remove the distributive head plug from the injection pump assembly.

SST
09260-54012  (09262-54010)


b.

Remove the O-ring.


Hide 22104 7.REMOVE INJECTION PUMP DELIVERY VALVE SUB-ASSEMBLY

a.
A370257N01
2.094,1.375 2.75,1.135 2.75,1.135 2.979,1.135 true 3.052,1.052 3.375,1.25 0.323,0.198 10 false SST

Using SST, remove the 4 injection pump delivery valve holders and 4 delivery valve springs from the injection pump assembly.

SST
09260-54012  (09269-54020)


b.

Remove the 4 injection pump delivery valve sub-assemblies and 4 delivery valve gaskets from the injection pump assembly.

NOTICE:

Do not touch the sliding surfaces of the injection pump delivery valve sub-assembly with your hand.


HINT:

Arrange the injection pump delivery valve sub-assemblies, delivery valve springs and injection pump delivery valve holders in the order they were removed.