Home › Engine / Hybrid System › 5L-E FUEL › FUEL INJECTION PUMP › from 2016.01
RM3250E _51 Engine / Hybrid System _049912 5L-E FUEL _0242563 FUEL INJECTION PUMP A

5L-E FUEL  FUEL INJECTION PUMP  REASSEMBLY  


PROCEDURE

Hide 22104 1.INSTALL INJECTION PUMP DELIVERY VALVE SUB-ASSEMBLY

a.
A370259N01
2.167,0.542 2.865,0.719 2.865,0.719 3.052,0.719 true 3.115,0.635 3.417,0.823 0.302,0.188 10 false SST

Install 4 new delivery valve gaskets and the 4 injection pump delivery valve sub-assemblies to the injection pump assembly.


b.

Install the 4 delivery valve springs to the 4 injection pump delivery valve holders.


c.

Using SST, install the injection pump delivery valve holder to the injection pump assembly.

SST
09260-54012  (09269-54020)

Torque:
58.9 N*m (601 kgf*cm, 43 ft.*lbf)


Hide 22176 2.INSTALL DISTRIBUTIVE HEAD PLUG

a.

Install a new O-ring to the distributive head plug.


b.
A370260N01
2.115,1.146 2.771,0.948 2.771,0.948 3,0.948 true 3.073,0.865 3.396,1.063 0.323,0.198 10 false SST

Using SST, install the distributive head plug to the injection pump assembly.

SST
09260-54012  (09262-54010)

Torque:
88.3 N*m (900 kgf*cm, 65 ft.*lbf)


Hide 23010 3.INSTALL TIMING CONTROL VALVE ASSEMBLY

a.

Using a 5 mm hexagon wrench, install the timing control valve to the injection pump assembly with the 2 bolts.


Hide 4.INSTALL WIRING HARNESS BRACKET

a.

Install the wiring harness bracket with the bolt to the injection pump assembly.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 23811 5.INSTALL FUEL FILTER TO INJECTION PUMP FUEL PIPE

a.
A370261

Install a new air bleeder nipple washer and the screw to the injection pump assembly.

Torque:
36.8 N*m (375 kgf*cm, 27 ft.*lbf)


b.

Install 2 new air bleeder nipple washers and the fuel filter to injection pump fuel pipe to the injection pump assembly with the cap nut.

Torque:
26.6 N*m (271 kgf*cm, 20 ft.*lbf)


Hide 23764 6.INSTALL NO. 4 NOZZLE LEAKAGE PIPE

a.

Install 2 new air bleeder nipple washers and the No. 4 nozzle leakage pipe to the injection pump assembly with the overflow screw sub-assembly.

Torque:
26.6 N*m (271 kgf*cm, 20 ft.*lbf)