Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM › 2016.01–2016.03
RM3250E _58 Vehicle Interior _038065 THEFT DETERRENT / KEYLESS ENTRY _0184917 THEFT DETERRENT SYSTEM U

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM  TERMINALS OF ECU  


CHECK BODY ECU AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


E317657C05
0.594,3.865 0.927,4.104 0.333,0.24 1.99,3.865 2.323,4.104 0.333,0.24 3.458,3.865 3.792,4.104 0.333,0.24 4.844,3.865 5.177,4.104 0.333,0.24 6.198,3.865 6.531,4.104 0.333,0.24 1.969,5.063 2.302,5.302 0.333,0.24 3.333,5.063 3.667,5.302 0.333,0.24 4.729,5.063 5.063,5.302 0.333,0.24 6.198,5.063 6.531,5.302 0.333,0.24 0.604,6.448 0.938,6.688 0.333,0.24 1.938,6.448 2.271,6.688 0.333,0.24 3.375,6.448 3.708,6.688 0.333,0.24 4.833,6.448 5.167,6.688 0.333,0.24 6.208,6.438 6.542,6.677 0.333,0.24 3.344,7.708 3.677,7.948 0.333,0.24 0.552,4.854 0.896,5.042 0.344,0.188 0.552,5.104 0.896,5.292 0.344,0.188 0.104,0.052 0.417,0.292 0.313,0.24 12 false *1 0.75,0.938 1.063,1.135 0.313,0.198 10 false 2L 0.729,1.281 1.042,1.479 0.313,0.198 10 false 2M 0.74,1.667 1.052,1.865 0.313,0.198 10 false 2D 0.74,2.031 1.052,2.229 0.313,0.198 10 false 2K 0.729,2.375 1.042,2.573 0.313,0.198 10 false 2C 0.615,3.01 1.104,3.219 0.49,0.208 10 false 2A (*A) 1.281,3.104 1.594,3.302 0.313,0.198 10 false 2B 3.333,0.896 3.49,1.094 0.156,0.198 10 false A 6.375,0.583 6.688,0.781 0.313,0.198 10 false 2Q 6.396,0.927 6.708,1.125 0.313,0.198 10 false 2J 6.385,1.281 6.698,1.479 0.313,0.198 10 false 2P 6.385,1.656 6.698,1.854 0.313,0.198 10 false 2N 6.385,2 6.698,2.198 0.313,0.198 10 false 2G 6.396,2.375 6.708,2.573 0.313,0.198 10 false 2H 5.865,2.927 6.177,3.125 0.313,0.198 10 false 2F 6.375,2.99 6.688,3.188 0.313,0.198 10 false 2E 0.698,3.906 1.01,4.104 0.313,0.198 10 false 2L 2.063,3.906 2.375,4.104 0.313,0.198 10 false 2M 3.552,3.896 3.865,4.094 0.313,0.198 10 false 2D 4.917,3.906 5.229,4.104 0.313,0.198 10 false 2K 6.271,3.906 6.594,4.125 0.323,0.219 10 false 2C 0.635,5.125 0.948,5.323 0.313,0.198 10 false 2R 2.042,5.094 2.354,5.292 0.313,0.198 10 false 2B 3.406,5.104 3.719,5.302 0.313,0.198 10 false 2Q 4.823,5.094 5.135,5.292 0.313,0.198 10 false 2J 6.292,5.104 6.604,5.302 0.313,0.198 10 false 2P 0.688,6.479 1,6.677 0.313,0.198 10 false 2N 2.021,6.479 2.333,6.677 0.313,0.198 10 false 2G 3.458,6.479 3.771,6.677 0.313,0.198 10 false 2H 4.927,6.479 5.24,6.677 0.313,0.198 10 false 2F 6.292,6.469 6.604,6.667 0.313,0.198 10 false 2E 3.469,7.74 3.625,7.938 0.156,0.198 10 false A 0.635,4.875 0.948,5.073 0.313,0.198 10 false 2A 0.958,4.865 1.271,5.063 0.313,0.198 10 false (*A) 0.979,5.115 1.292,5.313 0.313,0.198 10 false (*B) 0.615,3.188 1.125,3.365 0.51,0.177 10 false 2R (*B)
*A for LHD *B for RHD
*1 Instrument Panel Junction Block Assembly - -


E317658C05
2.24,3.344 2.625,3.583 0.385,0.24 4.563,3.344 4.948,3.583 0.385,0.24 0.125,0.073 0.438,0.365 0.313,0.292 12 false *1 5.76,1.531 6.219,1.729 0.458,0.198 10 false G28 5.76,2.021 6.219,2.219 0.458,0.198 10 false G27 2.313,3.385 2.771,3.583 0.458,0.198 10 false G28 4.625,3.385 5.083,3.583 0.458,0.198 10 false G27
*1 Body ECU - -


a.

Disconnect the G27 body ECU connector.


b.

Remove the body ECU from the instrument panel junction block assembly.



c.

Connect the instrument panel junction block assembly connectors.


d.

Measure the resistance and voltage according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
A-6 (BECU) - Body ground - Battery power supply Always 11 to 14 V
A-7 (IG) - Body ground - Ignition power supply (IG signal) Ignition switch ON → Off 11 to 14 V → Below 1 V
A-1 (GND) - Body ground - Ground Always Below 1 Ω
A-18 (DCTY) - Body ground - Driver side door courtesy light switch input Driver side door closed (OFF) → Open (ON) 10 kΩ or higher → Below 1 Ω
G27-14 (PCTY) - Body ground LG - Body ground Front passenger side door courtesy light switch input Front passenger side door closed (OFF) → Open (ON) 10 kΩ or higher → Below 1 Ω
A-21 (ACTY) - Body ground - Door courtesy switch signal input except driver door All doors closed except driver door → Any door open except driver door 10 kΩ or higher → Below 1 Ω
A-20 (HCTY) - Body ground - Engine hood courtesy switch input Engine hood open (OFF) → Closed (ON) 10 kΩ or higher → Below 1 Ω
G27-8 (KSW) - Body ground* G - Body ground Unlock warning switch input Key not in key cylinder (OFF) → Key in key cylinder (ON) 10 kΩ or higher → Below 1 Ω

*: w/o Entry and Start System




f.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
G27-15 (LSWD) - Body ground R - Body ground Driver side door unlock detection switch input Driver side door unlocked Below 1 V
Driver side door unlock detection switch input Driver side door locked Pulse generation
G27-17 (IND) - Body ground*1 Y - Body ground Security indicator light illumination Security indicator light illuminates
(It illuminates only for 27.5 seconds in alarm sounding state.)
3 to 10 V
G27-6 (HAZ) - Body ground SB - Body ground Hazard warning signal output Theft deterrent system in alarm sounding state Pulse generation
(Below 1 V ← → 11 to 14 V)
2P-14 (SH) - Body ground*5 G - Body ground Security horn drive Security horn sounding
(Theft deterrent system in alarm sounding state)
Pulse generation
(Below 1 V ← → 11 to 14 V)
G28-11 (SSCL) - Body ground*6 G - Body ground Theft warning siren drive Theft warning siren sounding (Theft deterrent system is in alarm sounding state) Pulse generation
(Below 1 V ← → 11 to 14 V)
2D-14 (HORN) - Body ground B - Body ground*3
GR - Body ground*4
Vehicle horn drive Vehicle horns sounding
(Theft deterrent system in alarm sounding state)
Pulse generation
(Below 1 V ← → 11 to 14 V)
2N-3 (ACT-) - Body ground GR - Body ground*7
LA-W - Body ground*8
Door lock motor unlock drive output Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
2N-2 (ACT+) - Body ground LG - Body ground*7
LA-B - Body ground*8
Door lock motor lock drive output Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
2J-4 (ACTD) - Body ground*9 Y - Body ground Door lock motor unlock drive output (driver door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
G27-9 (PRG) - Body ground V - Body ground Signal output to door control receiver*1
Signal output to certification ECU (smart key ECU assembly)*2
Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
G27-16 (RDA) - Body ground W - Body ground Signal input from door control receiver*1
Signal input from certification ECU (smart key ECU assembly)*2
Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
G27-10 (SSW1) - Body ground*10 P - Body ground Intrusion sensor cancel switch signal Intrusion sensor cancel switch on Below 1 V
Intrusion sensor cancel switch off Pulse generation
G28-12 (ISIF) - Body ground*10 L - Body ground Intrusion sensor (theft warning ultrasonic sensor) signal input No moving object detected by sensor during arming preparation state or armed state 11 to 14 V
Moving object detected by sensor during arming preparation state or armed state Pulse generation

*1: w/o Entry and Start System

*2: w/ Entry and Start System

*3: for RHD and for 1GD-FTV, 2GD-FTV

*4: except *3

*5: w/ Security Horn Assembly

*6: w/ Theft Warning Siren Assembly

*7: w/o Door Control Battery

*8: w/ Door Control Battery

*9: w/ Double Locking

*10: w/ Intrusion Sensor




COMBINATION METER ASSEMBLY


E316846N02
0.875,0.448 1.208,0.635 0.333,0.188 2.76,0.458 3.094,0.646 0.333,0.188 5.604,0.417 5.958,0.615 0.354,0.198 0.906,0.469 1.313,0.667 0.406,0.198 10 false G10 2.844,0.469 3.156,0.667 0.313,0.198 10 false G9 5.656,0.438 5.969,0.635 0.313,0.198 10 false G11

a.

Measure the voltage, resistance and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G9-19 (+S) - Body ground V - Body ground Speed signal for other system (Output) Driving at approximately 20 km/h (12 mph) Pulse generation (See waveform)
G10-12 (DOOR) - Body ground Y - Body ground Door courtesy switch signal except driver door All doors closed except driver door 11 to 14 V
Any door open except driver door Below 1 V
G10-15 (DCTY) - Body ground B - Body ground Driver side door condition signal Driver side door closed 11 to 14 V
Driver side door open Below 1 V
G10-16 (PCTY) - Body ground G - Body ground Front passenger side door condition signal Front passenger side door closed 11 to 14 V
Front passenger side door open Below 1 V
G10-17 (RLCY) - Body ground*1 V - Body ground Rear door LH condition signal Rear door LH closed 11 to 14 V
Rear door LH open Below 1 V
G9-18 (RRCY) - Body ground*1 L - Body ground Rear door RH condition signal Rear door RH closed 11 to 14 V
Rear door RH open Below 1 V
G10-20 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G9-21 (B) - Body ground*2
G11-7 (B) - Body ground*3
W - Body ground*2
L - Body ground*3
Battery Always 11 to 14 V

*1: except Single Cab

*2: for LHD

*3: for RHD


i.
E267248N05
2.979,1.188 3.365,1.448 0.385,0.26 10 false GND 1.146,1.646 1.354,1.854 0.208,0.208 10 false A

Using an oscilloscope, check waveform.

Waveform (Reference)
Item Condition
Tester Connection G9-19 (+S) - Body ground
Tool setting 5 V/DIV, 20 ms./DIV
Vehicle condition Driving at approximately 20 km/h (12 mph)

HINT:

When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.