Home › Drivetrain › AC60E AUTOMATIC TRANSMISSION / TRANSAXLE › EXTENSION HOUSING REAR OIL SEAL › from 2016.01
RM3250E _52 Drivetrain _038030 AC60E AUTOMATIC TRANSMISSION / TRANSAXLE _0189299 EXTENSION HOUSING REAR OIL SEAL A

AC60E AUTOMATIC TRANSMISSION / TRANSAXLE  EXTENSION HOUSING REAR OIL SEAL  REPLACEMENT  


PROCEDURE

Hide 37100 1.REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

Hide 2.REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL

a.
C323950N01
0.854,0.635 1.073,0.115 1.073,0.115 1.25,0.115 true 1.313,0.021 1.771,0.219 0.458,0.198 10 false SST

Using SST, remove the automatic transmission extension housing oil seal.

SST
09308-00010  


Hide 3.INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL

a.

Coat the lip of a new automatic transmission extension housing oil seal with MP grease.


b.

58 mm outer diameter seal type:

i.
C323951N01
1.198,0.865 1.427,0.115 1.427,0.115 1.604,0.115 true 1.677,0.021 2.135,0.219 0.458,0.198 10 false SST

Using SST and a hammer, tap in the automatic transmission extension housing oil seal.

SST
09309-37010  

Standard depth:

5.4 to 5.8 mm (0.213 to 0.228 in.)


NOTICE:
·

Make sure that the automatic transmission extension housing oil seal is installed in the correct direction.

·

Do not damage the lip of the automatic transmission extension housing oil seal.





c.

64 mm outer diameter seal type:

i.
C323952N01
1.438,0.969 1.844,0.104 1.844,0.104 2,0.104 true 0.479,0.469 1.854,0.104 true 1.177,0.813 1.833,0.115 true 2.146,0.042 2.604,0.24 0.458,0.198 10 false SST

Using SST and a hammer, tap in the automatic transmission extension housing oil seal.

SST
09950-60010  (09951-00460, 09951-00550, 09952-06010)
09950-70010  (09951-07150)
09710-14013  (09710-00021)

Standard depth:

5.4 to 5.8 mm (0.213 to 0.228 in.)


NOTICE:
·

Make sure that the automatic transmission extension housing oil seal is installed in the correct direction.

·

Do not damage the lip of the automatic transmission extension housing oil seal.