Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 5L-E) › from 2016.01
RM3250E _55 Steering _038049 POWER ASSIST SYSTEMS _0244978 VANE PUMP(for 5L-E) A

POWER ASSIST SYSTEMS  VANE PUMP(for 5L-E)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, place aluminum plates between the part and vise.

·

When using a vise, do not overtighten it.



PROCEDURE

Hide 44337 1.REMOVE POWER STEERING SUCTION PORT UNION

a.
C121998

Remove the bolt and power steering suction port union.


b.

Using a screwdriver, remove the O-ring from the power steering suction port union.


Hide 2.REMOVE FLOW CONTROL VALVE

a.
C106278

Remove the pressure port union.


b.

Remove the O-ring from the pressure port union.


c.

Remove the flow control valve and compression spring.


Hide 3.REMOVE REAR VANE PUMP HOUSING

a.
C106279

Remove the 4 bolts and rear vane pump housing.


b.

Remove the gasket.


c.

Remove the 2 O-ring from the rear vane pump housing.


Hide 44341 4.REMOVE FRONT VANE PUMP SIDE PLATE

a.

Remove the wave washer from the rear vane pump side plate.


b.
C106287

Remove the rear vane pump side plate.


Hide 5.REMOVE VANE PUMP CAM RING

a.
C106286

Remove the vane pump cam ring.


Hide 6.REMOVE VANE PUMP ROTOR

a.

Remove the 10 vane pump plates.


b.
C106281

Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.


c.

Remove the vane pump rotor.


Hide 44312 7.REMOVE VANE PUMP SHAFT

Hide 44302A 8.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C106280C01
0.833,0.729 0.604,0.365 true 0.385,0.208 0.698,0.365 0.313,0.156 10 false *a
*a Cloth


Using a screwdriver, pry out the vane pump housing oil seal.

NOTICE:

Be careful not to damage the front vane pump housing.